Description
ProdataKey Red | 1 One Door Controller R1, Ethernet, OSDP, Wiegand, Battery Monitoring
PDK's Red™ 1 controller includes built-in Ethernet connectivity and self-discovery, simplifying IP configuration and functionality. The Red 1 is equipped with OSDP functionality, an onboard power supply, and a fully supervised power circuit that monitors input, output, battery voltage, and overall controller health.✓ Advanced Security
ProdataKey Red products lead the industry in platform security. This includes OSDP, mobile, and encrypted credential communication.
ProdataKey Red products lead the industry in platform security. This includes OSDP, mobile, and encrypted credential communication.
✓ Self Discoverable
The Red 1 is automatically self-discoverable by the Cloud Node when an Ethernet cable is connected; no need to enter the IP address.
The Red 1 is automatically self-discoverable by the Cloud Node when an Ethernet cable is connected; no need to enter the IP address.
✓ Power Monitoring
Equipped with a fully supervised onboard power circuit that monitors input, output, battery voltage, and overall controller health.
Equipped with a fully supervised onboard power circuit that monitors input, output, battery voltage, and overall controller health.
Specifications
- Connections
- Removable Screw-down Terminals
- Built-in Power Supply
- Industrial-grade 2A Form-C Relay
- Reader
- Input A
- Input B
- Communication Options
- Ethernet
- WiMACTM Wireless (2.4 GHz/ 802.15.4)
- PoE++
- Encryption: AES 128bit
- Wireless Range: 1 Mile LoS, 450ft indoor average
- Environmental
- Temperature: -4° ~ +140° F /-20° ~ +60° C
- Humidity: 0 - 95% relative humidity
- Non-condensing
- Enclosure
- Dimensions (W x H x D) 7.625" x 10.4375" x 3"
- Metal lockable security can (indoor use only)
- Compliance
- Conforms to UL 294
Requirements
- Power
- 12V-24V DC Input
- 14 VDC 2A 28 watt class 2 wall-wart power supply (Input supply to the board)
- Powers readers and other door hardware directly from the bus
- Operating Amperage: 35mA (Continuous amperage draw when idle)
- Power delivery to the peripheral is shared among all ports. Total output to peripherals is 2AMPs at 12V when powered with the included 2.5 AMP wall adapter.
- *Battery not included, but a backup battery must be installed to comply with UL 294
NOTE: for proper operation, use the provided power supply. When not using the provided power supply, PDK recommends using a regulated power supply that outputs no greater than 24 volts as measured with a multimeter.
