Description
Alarm.com ADC-AC-X1100-2PSE X1100 Two Door Controller and Power Kit
Alarm.com's Smarter Access Control is a powerful, easy-to-use solution for commercial properties that seamlessly integrates with the Alarm.com for Business platform. This platform enables intelligent automation and features, such as disarming when badging in, locking doors when arming, and tagging access events on the video timeline.The X1100 Two Door Controller and Power Kit comes with an X1100 Door Controller pre-wired to a 12/24 VDC dual-voltage power supply. Installation is easy with this self-contained kit that can provide power for a complete 1- or 2-door access control system.
Features
- Two reader inputs
- Four relay outputs
- Four programmable inputs
- Pre-assembled to fully power a 1- or 2-door system
Benefits
- Scan-to-add card format and serial detection
- Control doors and manage users from the Alarm.com app
- User-friendly, flexible scheduling
- Configure hardware using web or app for easy installation
- Plug & play installation — no networking expertise required
Specifications
- Power Supply Input Voltage 120 / 208 / 230V AC 50/60 Hz
- Power Supply Main Outputs 1.5A @ 12V DC (B100)
1.5A @ 24V DC (FPV4) - Battery Charge Current 0.7 or 1.60A Selectable
- System BTU/Hour 34 @ 12V, 41 @ 24V
- Efficiency 85% 120V AC 60 Hz In, Full Load
- Certifications UL294, UL603, UL1076, ULC S318, S319, CSA C22.2#107.1, CSA 22.2 #60950
- RoHS Lead free
- CE Approved
- Operating Temperature -4°F - 122°F (-20°C - 50°C)
- Input Power 12 to 24 VDC ±10%, 550 mA max excluding reader voltage
- Reader Power 12 VDC ±10%, 500 mA max allowed each reader
- Communication Shielded 2-Wire RS-485
- Inputs Two dedicated reader inputs
- Four programmable inputs
One dedicated input for each of the following Tamper, AC Fail, and Battery Fail - Outputs Four relay outputs 5 A (NO) and 3 A (NC) @ 30 VDC
- Two-wire LED control
- Single-wire buzzer output
- Certifications FCC, CE, UL 294 Certified
- Dimensions (W x L x H) 6.46" x 5.51" x 1.02" (16.4 cm x 14 cm x 2.6 cm)
- Temperature 32°F - 158°F (0°C - 70°C) operational
-67°F - 185°F (-55 - 85°C) storage - Operating Humidity 5-85% (non-condensing) RH
- Dimensions 14 x 12 x 4.5" (35.6 x 30.5 x 11.4 cm)
- Weight 13 lbs. (5.9 kg)
- Conduit Knockouts 1/2" (15mm) and 1 1/4" (32mm)
Important: The interface is for use in low-voltage, Class 2 circuits only. The installation of this device must comply with all local fire and electrical codes.
