Description
ProdataKey Red | 8 Eight Door Controller, R8, Built-In Ethernet, OSDP, Power Supply & Power Circuit
PDK's Red™ 8 controller includes built-in Ethernet connectivity and self-discovery, simplifying IP configuration and functionality. The Red 8 is equipped with OSDP functionality, an onboard Altronix power supply, and a fully supervised power circuit that monitors input, output, battery voltage, and overall controller health.✓ Advanced Security
ProdataKey Red products lead the industry in platform security. This includes OSDP, mobile, and encrypted credential communication.
ProdataKey Red products lead the industry in platform security. This includes OSDP, mobile, and encrypted credential communication.
✓ Self Discoverable
The Red 8 is automatically self-discoverable by the Cloud Node when an Ethernet cable is connected; no need to enter the IP address.
The Red 8 is automatically self-discoverable by the Cloud Node when an Ethernet cable is connected; no need to enter the IP address.
✓ Power Monitoring
Equipped with a fully supervised onboard power circuit that monitors input, output, battery voltage, and overall controller health.
Equipped with a fully supervised onboard power circuit that monitors input, output, battery voltage, and overall controller health.
Specifications
- Connections
- Removable Screw-down Terminals
- Built-in Power Supply
- Industrial-grade 2A Form-C Relays (8)
- Reader (8)
- Input A (8)
- Input B (8)
- Communication Options
- Ethernet
- WiMACTM Wireless (2.4 GHz/ 802.15.4)
- PoE++
- Encryption: AES 128bit
- Wireless Range: 1 Mile LoS, 450ft indoor average
- Environmental
- Temperature: -4® ~ +140® F /-20® ~ +60® C
- Humidity: 0 - 95% relative humidity
- Non-condensing
- Enclosure
- Dimensions (W x H x D) 14.25" x 18.25" x 4.0625"
- Metal lockable security can (indoor use only)
Requirements
- Power
- 12 VDC
- Power readers and other door hardware using the built-in bus
- 10A concurrent max on the bus
- Operating Amperage: 35mA per board (Continuous amperage draw when idle)
- *12 ah backup battery not included but is required to comply with UL 294
NOTE: For proper operation, use the provided power supply. When not using the provided power supply, PDK recommends using a regulated power supply that outputs no greater than 24 volts as measured with a multimeter.
Included Power Supply
- Altronix eFlow 102NB
- 120VAC 60Hz input
- 12VDC output
