Description
Flair 1000-64WY BMS Surface Mount SPDT Balanced Magnetic Switch
The Flair 1000-64WY BMS Balanced Magnetic Contact utilizes two Form C high reliability Rhodium plated reed switches, one of the two reed switches being of different sensitivity, encapsulated in epoxy inside a solid aluminum case. This results in SPDT configuration with magnetic tamper. When the rare earth magnet is in place and properly adjusted (balanced), the magnetic tamper switch 2 will be in a state opposite to the switch 1. This normal configuration will change should one of the following occur; (1) switches 1 and 3 will change state by either the deliberate shunting of the magnetic field or if the door/window is opened, and (2) the addition of a magnetic field such as an external magnet will cause the magnetic tamper switch 2 to change state.
End-of-line resistors may be used to allow a pre-determined trickle of current to flow and permit operation from a supervised line at all times
- Surface mount switch and magnet
- 18" Armored cable, #22 AWG wire leads
- Wide gap
- Balanced magnetic configuration with magnetic tamper
- Solid aluminum case
