Description
Pace2KRT is a long range Ethernet adapter kit that transmits data and power via UTP (2-wire, twisted pair) in a PoE(+) compliant format. Pace1KR receiver is powered via a PoE midspan/endspan, such as the Altronix Netway series. The receiver passes the PoE compliant power over UTP to the Pace2KT transceiver which, in turn, provides two (2) PoE enabled ports: typically, one port for IP camera/device and the other to continue Ethernet pair to next Pace2KRT kit or another IP camera/device. These plug and play, cost-effective solutions facilitate IP devices that need to be installed at greater distances such as in elevator shafts, tunnels, bridges, HVAC, etc. supporting deployments over 1000m. Multipoint SPE configuration also offers a convenient solution to upgrade legacy 2-wire bus networks; LON Protocol, RS485 to Ethernet Device based networks.
Input
Pace1KR:
- Powered by midspan or endspan
- PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W)
Pace2KT:
- Powered by Pace1KR
UTP Connection
- Wire type: Twisted pair (2-wire, UTP)
- Distance: 1000m, 18/2 AWG @ 10Mbps.
- (see Maximum Length of Cable Type vs. Total Power Consumption chart below).
Ethernet Connection
- Connectivity: RJ45, auto-crossover.
- Wire type: 4-pair, CAT5e or higher.
- Distance: up to 100m from midspan to Pace1KR receiver (headend), 100m from PaceKT transceiver to device
- Speed: 10/100BaseT, half/full duplex, auto negotiation.
- PoE: IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to device by Pace1KR Power provided by Pace1KR to Pace2KT by PoE protocol.
Indicators (LED)
- Green LED (left): PoE (link)
- Green LED (right): Data transmission (link)
- Yellow and Green LED (by RJ45 jack): IP Link status, 10/100Base-T/active.
Temperature
Operating:
- -40ºC to 75ºC (-40º to 167ºF).
Storage:
- -40ºC to 75ºC (-40º to 167ºF).
Relative Humidity
- 85%, +/- 5%, non-condensing.
Operating Altitude
- - 304.8 to 2,000m
