Description
Altronix eFlow104NB UL Listed Sub-Assembly power supply/charger converts a 120VAC, 60Hz input into a single 24VDC output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.
Features
Input
- Voltage: 120VAC 60Hz, 4.5A max.
- Input Fuse: 6.3A/250V
- Removable AC input terminal block to facilitate installation and wiring
Output
- 24VDC output
- 10A continuous supply current
- Aux. power-limited output rated @ 1A (unswitched)
- Over Voltage Protection
- Filtered and electronically regulated outputs
Battery Charging
- Built-in charger for sealed lead acid or gel type batteries
- Automatic switch over to stand-by battery when AC fails
- Transfer to stand-by battery power is instantaneous with no interruption
- (Batteries are sold separately)
Fire Alarm Disconnect
- Supervised Fire Alarm disconnect (latching or non latching) 10K EOL resistor
- Operates on a normally open (NO) or normally closed (NC) trigger
Supervision
- AC fail supervision (form "C" contacts)
- Notification trigger is selectable for 30 seconds (factory set) or 2 hours
- Battery fail & presence supervision (form "C" contacts)
- Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge.
Additional Features
- Green AC Power LED indicates 120VAC present
- AC input and DC output LED indicators
- Short circuit and overload protection
