Description
Altronix T2ZK7F16 kit consists of Trove2 enclosure, TZ2 ZKTeco/Altronix backplane with one (1) 24VDC @ 10A power supply/charger, two (2) fused access power controllers, one (1) voltage regulator and one (1) dual input fused power distribution module.
This kit also accommodates up to four (4) ZKTeco modules for up to sixteen (16) doors in a single enclosure. Trove simplifies board layout and wire management, reduces installation time and labor costs.
eFlow104NB Power Supply/Charger
- Input:
- Voltage: 120VAC, 60Hz, 4.5A max.
- Main Fuse: 6.5A / 250V
- Outputs:
- Voltage: 24VDC
- Current: 10A continuous
- Auxiliary: Class 2 power-limited @ 1A (unswitched)
- Other: Overvoltage protection. Filtered and regulated.
- Battery Charging:
- Capacity: 12VDC/12AH (2 within enclosure); 40AH/65AH (requires separate enclosure)
- Type: Sealed lead acid or gel type
- Failover: Upon AC loss, instantaneous
- (Batteries are sold separately)
- Fire Alarm Disconnect:
- Supervised: Latching or non latching
- EOL: 10K Resistor
- Supervision:
- AC Failure: Form "C" contacts
- Battery: Form "C" contacts
- Low DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units. Prevents deep battery discharge
- Indicators LED:
- Input: 120VAC is present
- DC Output: Powered
PDS8 Dual Input Power Distribution Module
- Input:
- Voltage: 24VDC from eFlow104NB and 12VDC from VR6
- Main Fuse: 10A / 32V
- Outputs:
- Voltage: 12 or 24VDC
- Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2
- Individual outputs may be set to OFF position for servicing
- Output Fuses: 3A / 32V
- Indicators (LED):
- DC Output: Eight (8) individual output LEDs
- Green: 12VDC
- Red: 24VDC
VR6 Voltage Regulator
- Input:
- Voltage: 24VDC from eFlow104NB
- Output:
- Voltage: 12VDC
- Current: 6A continuous
- Other: Surge suppression
- Indicators LED:
- Input: 24VDC is present
- Output: Powered
Two (2) ACM8 Access Power Controllers
- Input:
- Voltage: 24VDC from eFlow104NB
- Main Fuse: 10A / 250V
- Outputs:
- Voltage: 24VDC
- Eight (8) independently controlled fused outputs:
- a) Fail-Safe and/or Fail-Secure power outputs. Form "C" Relays rated 28VAC or VDC @ 2.5A.
- b) Auxiliary power outputs (unswitched)
- c) Any combination of the above
- Output Fuses: 3.5A / 250V
- Indicators (LED):
- Red LEDs: Outputs are triggered (relays energized)
- Green LED: FACP disconnect is triggered
- Environmental:
- Temperature:
- Operating: 0°C to 49°C (32°F to 120°F)
- Storage: - 20°C to 70°C ( -4°F to 158°F)
- Relative Humidity:
- Relative Humidity: 85% +/- 5%
- BTU/Hr. (approx.):
- 128 BTU/Hr.
- Temperature:
