Description
The DA-500, GEN2, Drive-Alert Vehicle Detection System now includes a control panel with an internal alert whistle chime with volume control and choice of three chime tones, two built in timer relays, both 12VDC and 24VDC contacts for additional accessories, Zoning to provide two different chimes for two different areas monitored with different sensors, a "system mute" feature, one sensor, and 100 feet of cable.
The DA-500 has a sensor which monitors a 10-foot radius (20' diameter) to detect disturbances in the magnetic field caused by vehicle traffic in driveways, farm lanes, intersections and any areas where knowledge of movement is desired. Up to three An additional sensors may be added to a DA-500. The DA-500 sensor is not a PIR or "beam" sensor. Thus, the DA-500 does not have the false alarms common to that type of sensor; such as being triggered by animals, fog, weather, etc...
A residential installation allows the homeowner to know when someone enters the driveway or moves a vehicle or equipment. This is accomplished by a buried sensor which detects moving metal objects such as cars, trucks, motorcycles, trailers, or bikes. Then the sensor sends a signal to the control panel which sounds an electronic whistle alert.
The DA-500 Control Panel has 12VDC and 24VDC dry contacts, and timer relays, that can be used to activate gates, DVRs, external bells, lights, strobes, sirens, etc. whenever the DA-500 detects vehicles or a disturbance in the magnetic field around the sensor(s).
Placing the sensor next to objects such as campers, tractors, trailers, gasoline tanks, etc. allows you to detect any movement of those objects, aiding in the prevention of theft and vandalism.
Includes
- DA-500CP Control Panel with Open Contacts
- DA-051-100 Sensor with 100' Cable
