Description
The DoorKing UHF tag/card reader is designed as a long range RFID reader using passive tag/card technology. Passive tag/card technology does not contain a battery in the tag/card so it will never wear out. The long range reader emits an RF signal which powers the tag/card when the tag/card enters the scanning area of the reader's antenna. The tag/card relays its Wiegand number back to the reader which reports the tag/card's number to the connected access control system. There is an interface module supplied with the reader that eliminates the need to set up the system using a computer. All necessary settings and adjustments can be made using the DIP and rotary switch on the reader's control board. It is an effortless way to open the gate for authorized vehicles. Mount an authorized tag/card on the car that the antenna is able to scan and the gate will open as the car approaches.
The system will work with 26-Bit wiegand controllers. It uses frequency-hopping technology in the 902-928 MHz band (standard).
Features
- Adjustable read range; 8 ft to 25 ft.
- Two different operating modes: timing and trigger
- Uses frequency hopping technology in the UHF frequency band (902 - 928 MHz)
- Adjustable timing intervals between consecutive readings of same tag
- Uses passive tags - no batteries to worry about
- Dual technology cards are available allowing a single card to be used with both AVI and standard DK Prox readers
