Description
The 1602 operator is designed for traffic lanes up to 27-feet wide in low use commercial and industrial applications. This operator uses a counter-balanced three-piece wishbone style arm assembly. The 1602 operator is designed so that it can be mounted on either the left or right-hand side of the roadway. LED/Reverse edge light kits are available for the Octagonal arms only. The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.
The DoorKing 1602-090 is the barrier gate operator ONLY. Required hardware kit and arm are purchased separately.
Features
- Perimeter Access Management System: Automatic sequencing inputs for use with Slide and Swing Gate Operators
- Massive Lanes: Designed to control wide traffic lanes in limited use applications such as industrial sites and loading dock areas - 27 feet maximum
- WARN Beeper / Operate Beeper: Beeper will beep 2 times before lowering arm ONLY when the TIMER times out. If using a down loop, when it gets activated, it will cancel the timer and lower arm WITHOUT beeping. Beeper will beep 2 times before lowering arm EVERYTIME.
- Octagonal Lighted Signal Arm: Light the way for customers to exit easily and safely with signals and sensors
- Wishbone Style Joint and Cable Tensioners: Allows Arms up to 27 ft (8.2 m) in length
- DKS Pedestrian Protection System: It's aware — even when they're not
- Left or Right Hand Mount: Operators are designed so they can be mounted on either the left or right hand side of the roadway
Specifications
- 1 HP continuous-duty motor
- 60:1 gear-box running in a continuous oil bath
- 115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage)
- Arm rotates 90° in approximately 5.5 seconds
- Limited cycles (not for use in high cycle applications)
- Class III and IV applications
- Compliant with UL 325 and 991. ETL Listed(Note: To be compliant with UL 325 and industry safety guidelines, entrapment protection devices need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
- Dimensions (operator only): 15.25"W x 39.75"H x 15.75"D
Applications
- Apartment Complexes & College Residence Halls
- Gated Communities
- Mixed Use Buildings
- Commercial & Industrial
- Self Storage
- Parking Facilities
