Description
The Napco FWC-FSLC-SOM1-E is an addressable, enhanced supervised output module designed to connect to Napco DCP Signaling Line Circuits (SLC). It provides an end-of-line monitored 24VDC output for notification appliances (horns, strobes, bells), elevator recall, or HVAC shutdown on Napco Firewolf, FireLink, and GEMC panels.
Specifications
- SLC Applied Voltage: Rated Range 25.3 ~ 39 VDC
- SLC Current Consumption:
- Maximum 6mA: Red Alarm Light On
- Nominal 220µA (Typical)
- Auxiliary Applied Voltage: Rated 24VDC
- 24VDC Auxiliary Current Consumption: 50µA (Typical)
- Maximum Output Current (OUT+/OUT-, IN+/IN-): 2A @ 24VDC
- EOL Device for OUT+ & OUT- : NAPCO EOL Part No. 0400-02350 10KΩ
- SCI On Resistance: 60mΩ Maximum (Normal Condition)
- SCI Fault Detection Threshold: 12 Volts (Typical)
- SCI Isolation Current (Short Circuit Condition): 10mA (Typical)
- Maximum Quantity Per Loop: 127
- Visual Indicator (Status LED):
- bi-color LED - Green & Red
- Color & Mode - Selected and Programmed by Control Panel's software
- Operating Temperature Range: 0°C (32°F) ~ 49°C (120°F)
- Storage Temperature: -30°C (-22°F) ~ 70°C (158°F)
- Max. Relative Humidity: Up to 90% RH Non-condensing
- Environment: Indoor dry use only
- Dimensions: 4.2"W X 4.7"H X .85"D
