Description
Features
- 3-Unsupervised active-low 2A outputs activated by AC FAIL, BATTERY TBL and MICRO TBL
- One supervised GEMC-Remote Bus interface
- One normally-closed (N/C) housing tamper input, identified by trouble on dedicated integral EZM zone
- 4 status LEDs
- Power supply contains integral battery charger capable of charging up to 1 pair of 12AH/12V sealed lead acid batteries
- The system monitors for low battery, no battery, brownout; monitors battery charging circuit voltage, identified by trouble on dedicated integral EZM zone
- Solid state over-current protection
- Integral housing tamper switch inputs protecting the unauthorized opening of the housing cover and a rear tamper protecting the removal of the housing from its mounting surface
- Cabinet housing included
- Automatic switchover to stand-by battery when AC fails
- In Commercial installations, the power supplies are not to be employed as a power source for local audible alarm sounding devices or for off-premises alarm transmitter/communicators
Specifications
- Primary Input Power: 120VAC, 60Hz, 60W
- Secondary Input Power: Two 12AH batteries maximum
- Total Output Power: 2.1A minus selected charging current
- Two Auxiliary Power Outputs: 12V Regulated, 1.5A maximum each; 0.80A @ 12V maximum standby current for 24 hours
- Standby Current: 40mA for main board (less 40mA standby current for power supply board)
Agency Listings
- UL365: Police Station Alarm Units
- UL609: Local Burglar Alarm Units and Systems
- UL864 9th Edition: Commercial Fire
- UL985: Household Fire Warning System Units
- UL1023: Household Burglar Alarm System Units
- UL1610: Central Station Burglar Alarm Units
- UL294: Access Control Systems
- NFPA 72 National Fire Alarm Code
- Security Industry Association (SIA) False Alarm Reduction Standard CP-01
- CSFM: California State Fire Marshall (Fire Systems Only)
- NYCFD: NYC Fire Department (Fire Systems Only)
