Description
AL400ULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. This unit converts a 115VAC / 60Hz input into five (5) individually protected Class 2 Rated power limited 12VDC or 24VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.)supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form "C" dry output relay enables HVAC Shutdown, Elevator Recall or it may be used to trigger auxiliary devices.
Features
- Fire Alarm Panel or Access Control System trigger inputs. [NO] or [NC] supervised trigger input and polarity reversal trigger input (4mA draw from FACP)
- Five (5) individual power-limited Class 2 outputs (auto-resettable)
- Filtered and electronically regulated outputs
- Thermal and short circuit protection with auto reset
- Overload protection
- Output relay energizes when unit is triggered (form "C" contact rated 1A @ 28VDC
- Supervision:
- AC Fail
- Battery Fail and Battery Presence
- Built-in charger for sealed lead acid or gel type batteries
- Instantaneous transfer to stand-by batteries
- Power and input trigger LEDs
- DC output LED indicator
- LEDs indicate condition of power outputs
- UL Listed in the U.S. and Canada
- CSFM Approved
- Lifetime Warranty
- All units are available in grey or red enclosure
