Description
The SF131 Single and SF132 Dual Patient Stations include one or two DIN jacks for call cords, one or two call-assurance LEDs, and a single button to reset calls. Pressing the call cord's button registers a call at the NC415G3/ NC404TS Master Station and all associated dome and zone lamps. These stations can replace the legacy SF121 and SF122 stations, however, the SF132 can only be used with the Tek-CARE®120 System.
A cord-out call is registered if the call cord is accidentally removed from the call cord jack. The JK401 Dummy Plug is required when a station does not have a call cord plugged in, to prevent the station from placing a cord-out call.
The station assembly snaps onto a wall mounting plate leaving no visible screw holes.
Features
- One or two DIN call cord jacks (push-button and geriatric call cords available)
- Backlit reset button
- JK401 Dummy Plugs to prevent cord-out calls
- Call-assurance LEDs for each call cord jack
- RoHS Compliant
- No visible mounting screws
Required Components
- For use with:
- Tek-CARE®400 GEN3 Nurse Call Systems (SF131 only)
- Tek-CARE®3000 Nurse Call Systems (SF131 only)
- Tek-CARE®400 P5+ Nurse Call Systems (SF131 only)
- Tek-CARE®120 Nurse Call Systems
- NC415G3 or NC404TS Master Station
- SF4-series Call Cords or JK401 Dummy Plug(s)
Specifications
- Dimensions: 4.58"H x 3.25"W x 1.03"D
- Environment: 5%-95% non-condensing humidity; 0°C-60°C
- Construction: PC board with quality electronic components mounted on a flame-retardant (UL 94V-0) plastic faceplate
- Mounting: Attach included back plate to a standard single-gang ring or single-gang ring and box
- Connections: Lever-actuated connectors
