Description
The 2600 Closed Loop Sensors use an external power source to energize a built-in relay contact so battery power is not recommended. Used in a closed loop configuration, an alarm condition will occur when moisture is detected, or if power to the sensor is lost, and if the sensor should fail. The relay output can be wired directly to any alarm panel or can be used to actuate an external device, i.e. transmitter, annunciator, etc.
In sump pumps and areas of high humidity, GRI recommends a low sensitivity version: 2600-LS, 2600T-LS.
Features
- Will detect any conductive non-flammable liquid
- Ideal anywhere water damage could occur
- Automatic reset
- 6 ft jacketed lead standard
- Custom lead length available
- Normally Closed for a closed loop circuit 12 Volts DC
