Description
The Model 9050 operator is designed to operate vehicular slide gates in residential applications only. The operator is designed so that it can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operator can be pad or post mounted to meet any installation requirements.
Features
- Vehicular Entry Hassle-free for Authorized Users: Designed with safety features perfect for residential applications and high-traffic properties, a MicroPlus RF Kit included with the optional polypropylene cover makes vehicular entry hassle-free for authorized users
- Entrapment Prevention: System reverses gate on contact to prevent injury and damage
- Fail-Safe Release: Never be locked out (or in): In a power outage, these Operators "fail" in a "safe" condition allowing the gate to be pushed open without any special keys, cranks or knowledge
- Loop Detectors: Easy plug-in ports for DKS Loop Detectors
- Unique Design: Allows easy access to all mechanical parts
- Convenient: Built-in power switch and reset switch
Specifications
- Maximum gate length 20-feet
- Maximum gate weight 700 pounds* (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
- 1/2 HP limited-duty motor
- 115 VAC, 5.4 Amps
- Class I applications
- Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment protection devices are required to be installed with this gate operator)
Mechanical
- Self-adjusting, no maintenance magnetic limits
- Ports for plug-in loop detectors
- Two convenience outlets.
- Fail-safe release (fail-secure optional)
- Programming switches
- Built-in reset switch
- Built-in power On/Off switch
- Frame: G90 galvanized steel to prevent rusting
- Cover: Steel or polypropylene cover
- Primary Reduction: Single cog belt
- Speed: Approximately 10 in/sec (254 mm/sec)
- Chain: Unit is shipped with 20 ft (6m) of #40 roller chain, chain brackets, hardware
